High Strength Welded Steel Handle Joiner
The High Strength Welded Steel Handle Joiner is a robust, tough, handle joiner with superior torque resistance. It meets most commercial digging requirements.
When digging deep holes over 10 feet deep, or digging holes in rough ground, operation may require a lot of handle torque. The High Strength Steel Metal Handle Joiner increases the overall strength of the handle assembly. The robust metal handle joiner can easily replace the tough schedule 40 plastic handle joiner that is standard with all diggers. If you plan on a lot of digging the High Strength Steel Metal Handle Joiner will provide the added strength and durability for the toughest jobs.
Do I Need THe Metal Handle Joiner?
In most hole digging applications we have seen, the plastic handle joiner that comes standard with the Holey-Moley Digger is more than adequate. High Gravel or Rocky Soils can cause binding of the digger requiring more torque. The robust 3-inch schedule 40 handle joiner costs about 1/10 that of the metal joiner. They are readily available at your local hardware. We recommend when using the digger, should any binding occur, lift the digger 6 to 8 inches to let the binding rock or gravel fall into the hole. It can then be retrieved later using the vacuum hose directly down into the hole. If you are going to dig many holes then purchasing the High Strength Steel Metal Handle Joiner is always a good option for a backup spare if you need it.
For More Information
See our Videos page for more information on our digger and burial of cache tubes.
Our distributor Keene Engineering, manufacturer of gold dredging equipment, in Chatsworth, CA is now carrying some of our Holey-Moley products.
For more information give us a call. We are here to help.